Going to taper sand away about half thickness of aluminium at tip 2.
Date: 10/22/2009
Views: 3435
45_CS_hardware
Date: 12/31/1969
Views: 2105
Newest Image
EAA SITE
Date: 08/23/2023
Views: 174237
DoorSupportMod48Ann
Next the holes for the brass pivots will be drilled in the channel and large AN washers will be bonded to the inside of the airframe to provide support and wear resistance. Brackets for the door connection will also have to be prepared and attached to the doors/arms.