Vertical upright, swing-arm and generator install 2 of 7.
Date: 08/12/2003
Views: 5064
108_0813_IMG
Date: 10/11/2003
Views: 4033
Newest Image
EAA SITE
Date: 08/23/2023
Views: 184636
ThrottlePlate00
The center- line of the plate was measured and marked. The measurements for the throttle lever slot and screw holes were taken from the throttle quadrant and transferred to the back of the plate. A jig was set up to position the drill on the center -line of the plate.