First ply being held flat, then a bit of heat added.
Date: 01/11/2010
Views: 3099
IMG_0248post
Date: 09/14/2010
Views: 3239
IMG_1557
Date: 06/07/2004
Views: 3055
Newest Image
EAA SITE
Date: 08/23/2023
Views: 94153
WingSet26Ann
Went back to the port wing to see what else needed to be done before I ran the wing fully into the fuselage and tried to pin it in place to confirm the wing incidence. Oops... There is supposed to be a spar socket on the port spar. No spar socket. Looked inside the fuselage and there it was. Firmly wrapped around the end of the starboard spar. That's not good.